HOW TO INSTALL

1. Remove the old stock by removing the recoil pad with a Philips screwdriver and then the bolt inside the stock with either a 6mm allen hex on an extension or a 13mm hex socket.
2. Do NOT assemble all of the pieces of the new foldable/adjustable stock before installing onto the shotgun.  They need to be installed in the following order:
   1. Install the pistol grip section first by placing it over the female threading on the receiver where the stock was removed.  Attach with the LARGE bolt and washer. 
   2. Once the The grip is installed, take the FOLDING assembly and place on nylon locking nut in the LEFT side hole that is hex-shaped.  Make sure the nylon locking part of the nut is on the OUTSIDE.  The nut should fit very tight in that hold and be pushed completely inside the hole.
   3. Push the “folding” section male piece into the handgrip female section.  It will only fit in one way.  Make sure that it is pushed all the way in.
   4. Use the long smooth shaped bolt with the short threading on the end to secure the folding section to the handgrip by inserting it in the RIGHT side and screwing into the locking nut with an allen wrench.  Tighten until completely snug, but don’t overtighten.
   5. Take the final “buttstock” piece and place the remaining nylon locking nut in the hex shaped hole on the LEFT side of the male receiver on the stock.  Ensure that the nylon locking part is on the OUTSIDE and that the nut is pushed completely into the hole. 
   6. Push the male section of the buttstock into the female section of the folding piece previously installed.  Place the final remaining screw into the hold on the RIGHT side of the stock and tighten with an allen wrench until snug, but don’t overtighten. 
3. Once installed, push button on the right side of the folding assembly for function testing.
4. To adjust the length of the stock, push on the adjustment lever on the buttstock section.  While pushing the lever, push or pull the adjustable stock to the desired length until it locks into place in one of the 5 positions.

REFER TO THESE INSTRUCTIONS FOR INSTALLATION AFTER PURCHASE.